toysoft Posté(e) le 9 octobre 2015 Partager Posté(e) le 9 octobre 2015 SuperSim3 Japhar-Ferrari DM800HD : OpenPLi 4.0 with 700 Free IPTV channels, for Japhar SuperSim3 NC3 MEGA Link : mega.nz/#!UZszUSaR!DbtsgxVYF3sAQDVik7DUZU9LD-0ykdpHguDRZKMA0_0 1 Citer Lien vers le commentaire Partager sur d’autres sites Plus d'options de partage...
pigiut206 Posté(e) le 10 octobre 2015 Partager Posté(e) le 10 octobre 2015 bonjour bon travail, bien fait et merci Citer Lien vers le commentaire Partager sur d’autres sites Plus d'options de partage...
toysoft Posté(e) le 4 décembre 2015 Auteur Partager Posté(e) le 4 décembre 2015 - Gstreamer 1.6.x has been updated- Newer gstreamer 1.6.x master git snapshot: They've pretty much reworked HLS (m3u8) handling completely. There should be no more jumps when switching bitrates.- DTS Downmix should now be working on the dm800se, dm500hd and dm8000. Also pausing the video should work now (untested).- Fragmented streams work now (m3u8) - Remote control delay is now set by default to 300ms- Feeds online for online update of image and future updates/fixes if necessary.- Improved streaming performance in both the dvbmediasink and enigma2, Dreambox fixes for the dvbmediasink: Framerate and resolution should now be handled correctly.- Fragmented streams should now play more smooth and give less freezes due to async changes.- IPTV List and JAM 5.2 Panel are now pre-shipped.- Japhar Addon Manager 5.2 included.- IPTV List built-in with 800+ IPTV FREE Channels. - DM800HD : https://mega.nz/#!1BFBHJiQ!Y3OBOTtf4oerePSxbBlIKAw8nkTE8k3AQqweQwcW7RQ 2 Citer Lien vers le commentaire Partager sur d’autres sites Plus d'options de partage...
toysoft Posté(e) le 15 décembre 2015 Auteur Partager Posté(e) le 15 décembre 2015 Users running the previous Gstreamer 1.7.0 image, should be able to peform a Software Update! - DM8000HD+ : https://mega.nz/#!9Q8TwRYL!hsBWZhpORoGfb52f7kdJg_k_HXtuLz6Qh_UGCpmnw1M - DM800HDse+ : https://mega.nz/#!5Ys30IQR!LcYjX3X8F3PexvJWjEH4POTRe1ZuaYfOAsMAGUwt5pU - DM800HD+ : https://mega.nz/#!8d1CgDQb!E1bd3XcpmEsDNJlYgXxmCj7Pot5B_S9VjTzvUcbZIU4 - DM500HD+ : https://mega.nz/#!td8XzDBK!gUWZTa-087opZd9Vk50kRxzlZM7xazd35W7EjPYibiM Changes since previous release: - mx3L's gstreamer revert which fixes mp4 playback from remote locations - Spark drivers updated to 20151113 - Using aio-grab from oe-alliance which includes fixes for sprak receivers - New Japhar IPTV List (thanks to ToySoft). - DM8000 has no more gsod's now (thanks to ToySoft for testing!) Changes compared to openpli-oe-core gst-1: - Ships with gstreamer upstream master git: Using the same patches as openpli-oe-core gst-1 with only these changes: Removed: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch because this patch was already checked in upstream. Added: 0001-Revert-qtdemux-respect-qt-segments-in-push-mode-for-.patch By mx3L which fixes mp4 playback from remote locations. - Every receiver uses christophecvr's multibox dvbmediasink. - Using libtrmp and rtmpdump from oe-alliance. - Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support). These are only applied for Dreambox receivers. - AAC to AC3 transcoding V2 by mx3L (requires a fast cpu). - IPTV Player from samsamsam included (thx to Athoik for the recipe). - Large list of public IPTV streams included thanks to the Japhar Team. - Updated libcdio and cdtextinfo for audio-cd support by christophecvr. - DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201: added si2166b blindscan support - Spark images includes the pti.ko from OpenATV so softcam's should work now. - Using aio-grab source from oe-alliance which includes fixes for spark receivers. - The 2.6.18 kernel will now always pass the vermagic check when loading modules. Now you can try and load any kernel driver from OE1.5 to 2.0. Known issues: - DM800 first boot will take a while, please be patient. The next boot will be faster. - On spark/spark7162 you need to set 'boxtype = dreambox' for oscam dvbapi. We're using the OE-A drivers and 'duckbox' doesn't seem to work on these. - On spark/spark7162 you need to set a skin which doesn't resize the framebuffer. Because sometimes it doesn't scale back to fullscreen. I've included the MX-HQ7 skin for use as workaround. - On Zgemma Star you cannot use fullHD skins. This is a hardware/driver limitation. Please don't try it, it will crash enigma2. - Some Dreambox remotes behave very sensitive. This causes button presses to register multiple times instead of just once. As a workaround you can adjust the key interval: Go to: Menu - System - Input devices - dreambox remote control (native). Set "Change repeat and delay settings" to yes Set "Interval between keys when repeating:" to 200ms or 300ms. Press green button (OK) Now set the same delay for: "dreambox advanced remote control (native)" as well. Gstreamer recipes (20151213): https://mega.nz/#!ugMEjKSb!cAF-uGWX5N9UOg6Qmr4XGqNSta-uwNxeaBxiD4FSBsI Dreambox DM500HD: https://mega.nz/#!qwcTUCqS!RBkQgJLwbwp-7x-lSKywbfcmK9OKJEao90ArEJ0BWcs Dreambox DM500HD V2: https://mega.nz/#!Gp1jTDyR!Cdd-Ze2Gg7PonYe22byKHrprxsaPMX5AmwSi-GOWXys Dreambox DM7020HD: https://mega.nz/#!zh8BnKgT!nmGwvubmdXNLU47hskHMM7Rje06q-Xiw28MdA3nSKjQ Dreambox DM800: https://mega.nz/#!GsEQHKZK!JFRw4g6qmqdTTQUbQPMYTQMRnfx0c1vXLhIoEi2QwHo Dreambox DM8000: https://mega.nz/#!201GSKzb!G4cH-IQsgpdgWpeTSmXu6xHSMZStdiGKKuGzm86DKYQ Dreambox DM800Se: https://mega.nz/#!LtESQJ7a!MqXWfa3hK6dUM1emBkbYhM5B3npJ5_FGXg7Fn7dfFDA Dreambox DM800Se V2: https://mega.nz/#!X4UkyZIJ!9pI-4YR8YJSLZjbDwyBnP74_lTXxJclaArNPuBsdnr8 Xtrend ET10000: https://mega.nz/#!ng03wD7L!Fd2ocVoCFnN5Sfxtwed2dh9IFRwNxpZPlxAfW5IJxRQ Xtrend ET9x00: https://mega.nz/#!vhNgURKb!ZTLyCNbvRaLoKrrBr6xiV2WpCDK4wFv2TcMp9zMPG8M Xtrend ET8500: https://mega.nz/#!WkE1xRTI!aC4KPGuQ3HmgkjPKHzfWTQJWhcWJlXolgPE27R-v4y0 Xtrend ET8000: https://mega.nz/#!7ssUVCiY!ByEBciB0f722iTGBbDHmf4djug2UpH-xBFC7rf52RTo Xtrend ET7x00: https://mega.nz/#!LpM2nA6Q!2nFv1M8-XJEaou2GRfETbGGQAwI1oH70jZPQ2cT0FGU Xtrend ET6x00: https://mega.nz/#!HxdSgCbY!lyobqYEBgBMKE00GnkIz4E0yFFtgIVFhh2VZoh3uybg Xtrend ET5x00: https://mega.nz/#!S19gDTQL!g_woheUYusjq751liN4iGlPvOqiSApa88CsN5xqG2vM Xtrend ET4x00: https://mega.nz/#!yt9yybIT!Afg9O-59ZNNcSfjtYa_UrCaAybLKKZVx7rhPWAURP7I Formuler F3: https://mega.nz/#!z80jHaZB!q3PNSqaqq_1ijtsYN7-XoNdiaqxsK5kuv5clNryXoUY Formuler F1: https://mega.nz/#!Kps0zTjS!S3nW-oZxBoOHvAByvgzWYCE4hLqX3o7F5ZQ9XFvlrD0 Mut@nt HD2400: https://mega.nz/#!z81gwIYb!8ScjiRcwRH-hSAUY_TfY3Jm-GQrwrcoyiHN2TiemBF0 Mut@nt HD1200: https://mega.nz/#!qskT3RLa!sAx7RktstetU6gdwdREA_2ysMNfUMranynX2s_rYE4k Mut@nt HD1100: https://mega.nz/#!bsUzGIzS!_AKWRu_75Jj2IseukprT9mlPln4IT1BMgHspnTw4ZgM Mut@nt HD500C: https://mega.nz/#!b8FnlKiZ!-H83sq6ki5pcXR_GPy6JmsxjJ-LHz-dgoSkubJ4XwsU MaxDigital XP1000: https://mega.nz/#!X5cl1J7R!qWX6grnqq88ZfyZp2tZVe_0TF9aJOyJgVLLKXix-fas XSarius Fusion HD: https://mega.nz/#!qts2yB6Q!8IOeZvFxiFqNtz3CZpz5Psr_SvTuQeY1cPifjgZzIqI XSarius Fusion HD Se: https://mega.nz/#!XlMXXKQT!tPQ7XVWRocjj8xrrqB8YFtrIl8xG7yMB-IaetiafrII Vu+ Solo: https://mega.nz/#!ml9HwZCa!7e1354Px-b4mok8-B_5YGihgbCFGmzbJi6A2X6zjnQ8 Vu+ Solo 2: https://mega.nz/#!vsdBTSIB!7fP-aeY648NSEgKk4DRdDY-FTlckbMJ703abGLg_CUc Vu+ Solo Se: https://mega.nz/#!flFVDKQC!F_1wqnmwQraUZiYbMwPSUjhgZZMeyTza_KfwKVBfZDM Vu+ Duo: https://mega.nz/#!20lHhLxL!1C1ipCAubNcEzp3lIkyH7OAntEqHykNfk_BWxTLhQHY Vu+ Duo 2: https://mega.nz/#!Po1THRiD!3MqGFJSZjeqbtTOCLIUJpCYhp6oGPyMLtM3S2Sbndo8 Vu+ Ultimo: https://mega.nz/#!m9dz0aSA!YSdmyXZpbX3mH3vPCLyFjggQ6jsNGmadGG0VHX4ycto Vu+ Uno: https://mega.nz/#!S8FDiYTa!hksnPpsvR9gZVYSXfDmnzJfUsNW7CZfODtJKfnWwMb8 Vu+ Zero: https://mega.nz/#!3s1iCL4B!4iHmnF_Fwn9h2Vdbx83UVxirgSJbXCiKpJNd0KmvAXs Fulan Spark: https://mega.nz/#!jpVwRBrI!D-rCx33eIF0VL4trehmymMZ8X-NtrODFzm9VCyLBSB8 Fulan Spark7162: https://mega.nz/#!zwVHDarK!5WRRZrz388_GGH9Zbyi-sZaArSToeucfvZpNK-ursUU AirDigital Zgemma Star S / H1 / H2 / 2S: https://mega.nz/#!P0VQUAaR!0zyA-p5P_LkyHRnAlhfdAj5jCBvV0o5GhmCdyd5lslg AirDigital Zgemma Star HS / H2S / H2H: https://mega.nz/#!XkMyEBjL!NjUUG9AuF_ohQJf_ItIk6bjzntV_27rkqoEM6llV6DI OEM: - DM8000HD+ : https://mega.nz/#!9Q8TwRYL!hsBWZhpORoGfb52f7kdJg_k_HXtuLz6Qh_UGCpmnw1M - DM800HDse+ : https://mega.nz/#!5Ys30IQR!LcYjX3X8F3PexvJWjEH4POTRe1ZuaYfOAsMAGUwt5pU - DM800HD+ : https://mega.nz/#!8d1CgDQb!E1bd3XcpmEsDNJlYgXxmCj7Pot5B_S9VjTzvUcbZIU4 - DM500HD+ : https://mega.nz/#!td8XzDBK!gUWZTa-087opZd9Vk50kRxzlZM7xazd35W7EjPYibiM Sim2 DM800Se: https://mega.nz/#!m8kkyAjI!d-l0k8NAMDxs2IktSfTMXIR74BOvUznNaNmLRcovBCU Sim2 DM800Se V2: https://mega.nz/#!XwUAmZ5T!RJXQZa4O5mSHU48MK4A6xuvYbcYZUExjanz_9nPoSb4 Sim2 DM800: https://mega.nz/#!ulMhkLSD!8rbKgFpr280R46x_yyUzvYUtQZ1eflV0xZH5dnc-yxc Sim2 DM500HD: https://mega.nz/#!nk0BHDLR!Zjaq10CDDXT2j6VrQ71MGftotZB3SkjcJXJayb5yFUo E-Star DM800Se: https://mega.nz/#!P40RAQBR!-WmxWD_E1wry3zBrCRf-mxm6O4jVNfnr4lcYFzeVfaA E-Star DM800 (untested): https://mega.nz/#!r8NhSBYI!VdTlc7Eg615vhdIhp4riW6646LWNnB0qlylEp5r9XyE 1 Citer Lien vers le commentaire Partager sur d’autres sites Plus d'options de partage...
toysoft Posté(e) le 27 mars 2016 Auteur Partager Posté(e) le 27 mars 2016 Changes since last release: - gstreamer upgraded to 1.7.90 (nearing the final 1.8 release) - ffmpeg updated to 3.0 - gstreamer1.0-libav is now build against ffmpeg (thx to Taapat). - a patch from mx3L for servicemp3 that should speed up IPTV zapping - a second patch from mv3L for servicemp3 that should fix a possible GSOD when switching audio tracks - a third patch from mx3L for the dvbmediasink that should fix a possible GSOD on seeking in mp4 streams - support for bluray isos by Taapat - remote controls should now have their media-button working - added X Solo Mini 3 build - New vermagic magics, you should be able to load any kernelmodule again. - patch by christophecvr for setting the debug level in Menu -> Settings -> User-interface settings. Note : The patch for setting the debug level is very important since it fixes many possible IPTV issues on slower receivers like the DM800. Its highly recommended to set it level 0 - MEGA DM8000HD+ Japhar SSL84J : https://mega.nz/#!dENQEIpT!Kj1EyB_VMCzCPScs5vdoqQWLsFdBVozoxsHnm4tjoNE - MEGA DM800HDse+ Japhar SSL84J : https://mega.nz/#!FRMRAAhA!UVp28MxKH4muyW9cWzoS1OOto-sgru0KvEFNbgNMqRg - MEGA DM800HD+ Japhar SSL84J : https://mega.nz/#!FZVQnTJT!BoUyk-oVuuxqCcrnslmLjf9VTuvf_ZBnqT5w-TFFIZE - MEGA DM500HD+ Japhar SSL84J : https://mega.nz/#!BFMkkS7S!g9BZUfwBYpaNE4APwcZXOb4cBcafy3vPuBljxXwnM0s 2 Citer Lien vers le commentaire Partager sur d’autres sites Plus d'options de partage...
toysoft Posté(e) le 3 juillet 2016 Auteur Partager Posté(e) le 3 juillet 2016 VU+/DM Japhar OpenPLi 4.0 IPTV image from MastaG, 1300 Free IPTV Channels Here s a new batch of images based on OpenPLi 4 with many contributions from various openpli.org forum members and some bits taken from oe-alliance. So this is basically a tribute to them IMG01 It took me a while since I was very short on time and I had to re-install my build-rig, move to a new feed-server etc... SO DUE TO A NEW FEED-SERVER ONLINE UPDATE FROM PREVIOUS IMAGES IS NOT POSSIBLE! DON T TRY TO CHANGE THE URL IN THESE OLD IMAGES SINCE THERE S BEEN TOO MANY CHANGES WHICH WILL BREAK THINGS! PLEASE FLASH A CLEAN IMAGE INSTEAD! So here s whats up: - Brand new bootlogo thanks to .:MarcinO:. - OpenPLi enigma2 rev: 4bf2f1e45593065f9e2b4563f30463487b727c94 - OpenPLi oe-core rev: d76cfe6a39c6613ac77578840b214f0f1e748a39 - Taapat s Fulan enigma2 rev: 2a984c500f5b2ea657f68742b7dc4e47f5586483 - New receivers supported: * osmini * osminiplus * spycat * spycatmini * et7000mini * xpeed lx * xpeed lx pro - New feed server located in Europe thanks to the Japhar team! - New Japhar IPTV list - No more use of UPX compression on ARM platform (should fix the Vu+ Solo 4K build) - Latest gstreamer 1.9 revision from master branch - FFmpeg 3.0.2 with extra options enabled (based on oe-e recipe) - Kodi 16.1 for Vu+ Solo 2, Solo Se, Duo 2, and Solo 4K (thanks to mx3L for his bsp + recipes) - More wifi drivers (mt7601, rt7777 etc..) taken from oe-alliance - Slightly newer v4l modules for kernel 2.6.18 (dm800) - New version of mx3L s serviceapp now supports EPG and embedded subtitles - New version of exteplayer3 - Flash extender PPanel for dm800, dm800se and dm500hd (* Please read below) - Many other changes I forgot to mention... Known issues: - On spark7162 (and 7111 probably as well) fragmented streams such as hls (m3u8) will skip and freeze a lot. This happened sometime after the official Gstreamer 1.8.0 release and I didn t found the cause yet. It is not related to the dvbmediasink since it doesn t happen on mips receivers and the code in the dvbmediasink didn t change. Configure your streams to play with exteplayer3 instead, read below. - Some Dreambox remotes may behave very sensitive. This causes button presses to register multiple times instead of just once. As a workaround you can adjust the key interval: Go to: Menu - System - Input devices - dreambox remote control (native). Set "Change repeat and delay settings" to yes Set "Interval between keys when repeating:" to 200ms or 300ms. Press green button (OK) Now set the same delay for: "dreambox advanced remote control (native)" as well. - DM800 first boot will take a while, please be patient. The next boot will be faster. Flash extender for DM800, DM800Se and DM500HD: Since these receiver only feature 64MB of internal flash space, I ve been unable to ship all packages. ffmpeg, exteplayer3, gst1.0-libav, mediaplayer2, iptv player, subssupport etc.. are missing due to insufficient space. That s why I ve created a simple PPanel script for moving the entire internal flash to an external storage device such as internal hdd or usb disk. The PPanel will also install all the missing packages for you. So you can have all the bells and whistles like the other receivers IMG02 However please note that: - It will format your storage device thus deleting everything. - It s not compatible with other flash-extenders such as barry alen, multiboot etc... - You ll need a working internet connection when running the PPanel or else it cannot install the missing packages. - You need to patient! As the script runs you ll only see a black screen which an take up to 15 minutes depending on the size/speed of your storage device and your internet connection. You can find it under Blue Panel -> PPanels ServiceApp and exteplayer3: Thanks for the hard work from mx3L and samsamsam you can now play your IPTV streams with exteplayer3 or gstplayer instead of the default dvbmediasink. Especially using exteplayer3 will give much better performance on playing HLS streams compared to gstreamer + dvbmediasink. For example, playing DJING underground 720p never worked very well on my DM800HD and now it does In a nutshell here s how it works. In your /etc/enigma2/ directory you have your channel bouquets with the .tv and .radio extensions. Inside these files there s this for example: #SERVICE 4097:0:0:0:0:0:0:0:0:0:http%3a//cdn.djing.com/tv/u-05.m3u8:DJING Underground (CDN) #DESCRIPTION DJING Underground (CDN) By default this will play with the gstreamer dvbmediasink (which is currently broken for sh4). If you like to play your stream with exteplayer3 instead you should change the 4097 to 5002, like this: #SERVICE 5002:0:0:0:0:0:0:0:0:0:http%3a//cdn.djing.com/tv/u-05.m3u8:DJING Underground (CDN) #DESCRIPTION DJING Underground (CDN) You can also change it to play with gstplayer using 5001: #SERVICE 5001:0:0:0:0:0:0:0:0:0:http%3a//cdn.djing.com/tv/u-05.m3u8:DJING Underground (CDN) #DESCRIPTION DJING Underground (CDN) So it s like this: 4097 = default player, which is the dvbmediasink if serviceapp is not enabled 5001 = gstplayer 5002 = exteplayer3 Now let s say you d like to convert your entire bouquet to play with exteplayer3, simply login to your receiver with telnet/ssh (use PuTTY for Windows). And issue to the following commands: First stop enigma2: init 4 Then change your bouquet to make all streams play with exteplayer3, lets say userbouquet.favourites.tv: cd /etc/enigma2 sed -i s/^#SERVICE 4097/#SERVICE 5002/g userbouquet.favourites.tv Then restart enigma2: init 3 That s it ! You can also make exteplayer3 the default backend for playing back everything. Go to Menu -> Plugins -> ServiceApp and set exteplayer3 as default. Keep in mind that with exteplayer3 or gstplayer as default backend you will not have support for external subtitles yet (.srt for example). That s why I ve added MediaPlayer2 and SubsSupport from mx3L. Please thank mx3L for the hard work he put into this - Japhar DM500HD+ : https://mega.nz/#!3VBXEDhR!xrobDWOeMrFgCqRQTfUSuKlXepof6fB2TcAtv3v6pYA DM800HD+ : https://mega.nz/#!nVhQnZYZ!H56CtR356FiFOmM5KesFiSdWv1qTcJemhCY96V53JME DM800HDse+ : https://mega.nz/#!nVQFSKbL!ZebU1ZuMEPz275PAyBCV1CV8KcyDKgr295oOS7u9OnM DM8000HD : https://mega.nz/#!eFhUmJYZ!SuirJs7XPJ7mrJ32NHblmy_2IOGnIPC4zc8s_eGNfLE 2 Citer Lien vers le commentaire Partager sur d’autres sites Plus d'options de partage...
toysoft Posté(e) le 22 juillet 2016 Auteur Partager Posté(e) le 22 juillet 2016 - Support for BlackHole skins (the analog arrows), so the original mx-hq9w also works flawless on PLi now - New gstreamer 1.9.1.1 with many fixes - New ca-certificates - OpenPLi now features a overscan wizard which lets you adjust the OSD to the borders of your TV (by PLi-team) - Python-pycrypto now installed by default to satisfy many plugins - Lots of stuff I forgot VU+ Solo : https://mega.nz/#!iQRXVbbJ!VkMn2Roua8J0t3SyFTTHbyaX_7FAk96N_FzGBF6dP48 VU+ Duo : https://mega.nz/#!SMIHhAwI!sUCvQxyc-MxK5H9QLqoT9vGmN-O4NAFNLp_HtT0OqhA VU+ Uno : https://mega.nz/#!rZ4EkK7Y!4j6_Gy9Vwu9e5VwuB25ocSB2RyCYe6U3Dj9XZGl56Yw VU+ Solo2 v1 Lonrisun : https://mega.nz/#!WFZFVBpT!Z5S-QJoargYi8mGr_TZ8dlMyvnpE57WRlhFiSedt9xI VU+ Solo2 v4 Lonrisun : https://mega.nz/#!Xch13KAB!AnRIu4pmpXKBKXb8aBkK07ovvatITwLbbCQFzA80u-8 DM800HD Japhar : https://mega.nz/#!6cZHSYIZ!-dJFteuzZk1oeVSYnoXaq4peWveC8dHFUbC_B3SmuQA DM500HD Japhar : https://mega.nz/#!3VZUlYaS!A6H1-fujds46qqXj2ImJWcHppvWU9c_ZhTlfOfZFaa0 DM800HDse Japhar : https://mega.nz/#!TMZgXTBL!s8XIk3m3cXkBCqCYQh1-jYFr2VMCsRNr9KBQVNnTCgg DM8000H Japhar : https://mega.nz/#!uFgRVAzR!jdjAoNDOFH08_ra6r3QrFwqdpe_DEsPIo2py135jH9c 1 Citer Lien vers le commentaire Partager sur d’autres sites Plus d'options de partage...
Invité olivier77 Posté(e) le 28 juin 2017 Partager Posté(e) le 28 juin 2017 Salut j'ai installer DM800HD SE japhar mais ma dream a bloquer au rebootage impossible de relancer ausecour !!! Citer Lien vers le commentaire Partager sur d’autres sites Plus d'options de partage...
toysoft Posté(e) le 8 juillet 2017 Auteur Partager Posté(e) le 8 juillet 2017 Il faut toujours contrôler quelle Sim tu as dans ta DM en premier, ou savoir avant de flasher une image. Il y a différents modèles de Sim, Sim 1.0, Sim 2.00, Sim 2.01, Sim 2.10, Sim Ferrari, Sim Estar et Sim Japhar. Mais le tool JapharFlasher récupère toute boite avec toute sim dedans, ensuite tu devras naturellement flasher l'image pour ta sim et trouver une image qui fonctionne avec ta sim. Si tu veux utiliser une image en particulier, très souvent tu devras tout simplement switcher sur la bonne sim compatible avec cette image. Rapellons que la Sim Japhar est capable de faire tourner toutes les images pour Sim 1.0, Sim 2.00, Sim 2.01, Sim 2.10, Sim Ferrari et naturellement aussi Sim Japhar, son nom est la NC3 Japhar ou SuperSim3. TS Citer Lien vers le commentaire Partager sur d’autres sites Plus d'options de partage...
Messages recommandés
Rejoindre la conversation
Vous pouvez publier maintenant et vous inscrire plus tard. Si vous avez un compte, connectez-vous maintenant pour publier avec votre compte.