newnigma2-stable-lean-dm800se-v4.0.9 -ramiMAHER#ssl84D

[maoui]

newnigma2-stable-lean-dm800se-v4.0.9 -ramiMAHER#ssl84D

 

 

sim2

 

enigma2 patched :2014/02/19: by ramiMAHER

 

################################################## ########## #########

 

Newnigma2 team proudly presents:

 

Newnigma2 v4.0.9

 

################################################## ########## #########

 

Info: since release of e2 v. 3.2 there is no dm7025 support yet. that's what dmm said.

 

Multiboot: No support for multiboot. Not planned. No need for such a tool.

 

GP3wizard: No support for gp3wizard. Probably not running. Not needed in Newnigma2 environment.

 

Important changes:

 

1. Install picons on USB-Drives:

 

press menu button -> setup -> system -> storage devices -> then press red button for initialize (be carefully all your data will be erased). last step is to mount the device.

 

next step: press blue button -> newnigma2 services -> sytsem tools -> expert settings -> change opkg ignore USB/HDD from yes to no. Restart enigma2 und install picons on your usb device.

 

2. network configuration:

 

If the IP address assigned manually, as well as the address of the DNS server must be entered.

 

press menu button -> setup -> system -> network -> adapter settings

 

3. install or upgrading:

 

before installing/upgrading packages, we now check if at least are 3mb free space in flash.

 

ipk's/packages from the newnigma2 team has a value which says the installer the minimum needed space for

 

the package. if the min required space is not available than the installation aborts.

 

!! Attention enigma2 ipk needs at least 9mb !!

 

4. issue due upgrade to v4.0.9:

 

if you have troubles by upgrading to v4.0.9 even no 9mb free space for the enigma2 package, so

 

you can first upgrade the newnigma2 installer package. After reboot try to upgrade again via gui, the installer

 

ignore's now the 9mb needed from the package and uses instead the value you set in

 

"blue button -> newnigma2 services -> system tools -> expert settings -> min. free space".

 

4. Bei Problemen mit dem Update auf v4.0.9:

 

Sollte das Update auf v4.0.9 nicht funktionieren, weil dem enigma2 Paket keine 9MB zur Verfügung stehen, so ist zuerst der newnigma2 installer zu aktualisieren.

 

Nach anschließendem reboot kann man den Upgradevorgang via gui fortsetzen. Dabei wird der Check des freien Speichers beim Upgrade auf den Wert gesetzt, der unter

 

"blaue Taste -> Newnigma Services -> System Werkzeuge -> Experten Einstellungen -> min. free space" eingestellt ist.

 

Your

 

Newnigma2 Team

 

Download

 

newnigma2-stable-lean-dm800se-v4.0.9 -ramiMAHER#ssl84D

 

[alain55mer]

bonjour J’ai comme ssl ( 84a ) puis je mettre une image ssl84d merci

[madecor]

Traduction svp.